Restoring PROGRAM Default Settings
42
Important: Restoring the default Program settings erases
and resets all user-defined settings for all programs as follows:
1st Start Time - 12:00am
Water Window - 16:00
2nd Start Type - High ET
2nd Start Time - 07:00 pm
Water Window - 05:00
Water Day Mode - Optimized by WT
Day Excusion - None
2. Turn the Upper Line knob to select Copy Program Defaults
as shown in the following example:
3.
COPY FROM STA 01 TO
STA 02 (Press BUTTON)
4.
Press and hold the Copy button. Release the button when
Copying Done is displayed.
COPY PROGRAM DEFAULTS TO
PGM A (Press Button)
COPY PROGRAM DEFAULTS TO
ALL PGM (Press Button)
COPYING...DONE!
1. Turn the Function dial to the COPY position.
Turn the Lower Line knob to select the program A, B, C or D) to
be restored. Or, to restore defaults to all programs simultaneously,
turn the Lower Line knob to select All Pgm.
!
To Next Page
Loading...
Need help?
General
