FOR CUSTOMER SERVICE
Dial 1-800-664-4740
Using the Help/Information Function
Help and Information Screen Overveiw
Set Audible Message Alert
BEEP ON MESSAGE
No
The screens provided in the Help/Information function provide
the detailed system information required for ET Everywhere
service setup and status information of various controller
operations and support functions.
The remaining Help/Info screens are selected in the following
sequence by turning the Upper Line knob:
*Serial Number Set Audible Message Alert
*WeatherTRAK Version Rain Service Status
*View Phase Integrity View Group Number
*Lock Phase Days Since Last ET Update
*ET Service Setup Data Current Depletion Rate
*ET Service Activation Status Run Time Valve Test Results
* Note: The information provided on these screens is required for
ET Everywhere service activation. During the setup procedure,
the WeatherTRAK customer service representative will assist you
in selecting and obtaining specific information from each screen.
1. Turn the Function dial to the HELP/INFO position. The Toro
Customer Service informaton screen is displayed by default.
1. With the Function dial in the HELP/INFO position, turn the
UpperLine dial to select the Beep On Message screen.
2. No is selected by default. To turn the audible alert feature on,
turn the Lower Line knob to select Yes.
To Next Page
Loading...
Need help?
General
