Troubleshooting Guide
Appendix A
1. Turn the Function dial to ADJUST. .
2. Turn the Upper Line knob to select a station.
3. Turn Lower Line knob to adjust +5% and watch for 7 to 10 days.
4. If your landscape is still too dry, increase 5% each week until
stress is eliminated. This is the optimal level.
2. Turn the Upper Line knob select BEEP on MESSAGE?
3. Turn the Lower Line knob to select No.
4. Turn the Function Selector knob to RUN.
The landscape is too dry.
The landscape is too wet.
The Alert tone continues to turn on.
2. Turn the Upper Line knob to select a station.
3. Turn the Lower Line knob to adjust -10% and watch your
landscape for 7 to 10 days.
4. If your landscape is still too wet, decrease 5% to 10% each week
until you see minor stress in you landscape.
5. When you see minor stress in your landscape, increase 5%
to set program at optimal level.
1. Turn the Function dial to ADJUST.
1. Turn the Function dial to HELP/INFO.
To Next Page
Loading...
Need help?
General
