Toro 41593 - Page 43

ChangingtheEngineOilFilter
1.Removetheforwardheatshield;refertoRemovingthe
ForwardHeatShield(page38)
2.Raisetheseats.
CAUTION
Componentsundertheseatwillbehotifthe
sprayerhasbeenrunning.Ifyoutouchhot
components,youmaybeburned.
Allowthesprayertocoolbeforeperforming
maintenanceortouchingcomponentsunder
thehood.
3.Alignadrainpanundertheengineoillter(Figure51).
Figure51
1.Drainplug
2.Engineoillter
4.Removetheoldoillter(Figure51).
Note:Disposeoftheusedoillteratacertied
recyclingcenter.
5.Wipecleanthesurfaceoftheoillteradapterofthe
enginewitharag.
6.Filltheoillterwiththespeciedoil.
Note:Allowthelterelementtosaturatewithoil.
7.Applyathincoatofthespeciedoiltotherubber
gasketonthereplacementoillter.
8.Installtheoilltertothelteradapterandturnthe
oillterclockwiseuntiltherubbergasketcontactsthe
lteradapter,thentightenthelteranadditional1/2
turn(Figure51).
Note:Donotovertightentheoillter.
9.Wipecleananyresidualoil.
ChangingtheEngineOil
1.Alignadrainpanwitha5.6L(6USqt)capacityor
greaterunderthedrainplug(Figure51).
2.Removethedrainplug(Figure51)andallowtheoil
todraincompletely.
Note:Checkthedrainplugsealforwearanddamage;
replacethesealifitiswornordamaged.
Note:Disposeoftheusedoilatacertiedrecycling
center.
3.Installthedrainplugintothedrainportoftheengine
oilpanandtightentheplugto33to37N-m(24to
27ft-lb).
4.Tiltthepassengerseatforwardandaligntheproprod
intothedetentintheproprodguideslot.
5.Removetheoilllercapfromllerneckofthevalve
coveroftheengine(Figure52)andslowlypour
approximately80%ofthespeciedamountofoilinto
llerneck.
Figure52
1.Oilllercap
6.Removethedipstickandchecktheoillevelinthe
engine(Figure53).
43