Toro 41593 - Page 46

Figure56
1.Water-separator-lter
canister
2.Drainvalve
3.Rotatethedrainvalveatthebottomofthe
Water-separator-ltercanistercounterclockwise(Figure
56).
Note:Allowthefueltodrainfromtheltercanister
completelyandthenclosethevalve.
4.Cleantheareaaroundthewater-separator-ltercanister
andlteradaptermount(Figure56).
5.Removethewater-separator-ltercanister(Figure56).
Note:Disposeoftheusedfuelandltercanisterata
certiedrecyclingcenter.
6.Cleanthemountingsurfaceofthelteradapter.
7.Lubricatethegasketonthewater-separator-lter
canisterwithcleanengineoil.
8.Installtheltercanisterbyhanduntilthegasket
contactsmountingsurface,thenrotatethelteran
additional1/2turn.
9.Ensurethatthedrainvalveatthebottomofthe
water-separator-ltercanisterisrotatedclockwise
tightly(Figure56).
ReplacingtheIn-TankFuelFilter
ServiceInterval:Every400hours
RemovingtheIn-TankFuelFilter
ServiceInterval:Every400hours
Note:Thefuellterisapartofthestandpipeassembly.
1.Settheparkingbrake,stopthepump,stoptheengine,
andremovethekeyfromthestarterswitch.
2.Atthefueltank,removethe4screws(#10x3/4inch)
thatsecurethecovertothetopofthefueltank,and
removethecover(Figure57).
Figure57
1.Screws(#10x3/4inch)5.Clamp—8mm(5/16inch)
fuelhose
2.Cover6.Hosetting—6.4mm(1/4
inch)
3.Fueltank
7.Hosetting—8mm(5/16
inch)
4.Clamp—6.4mm(1/4inch)
fuelhose
3.Loosentheclampsthatsecurethe2fuelhosestothe
2hosettingsatthetopofthestandpipeassembly
(Figure57).
4.Disconnectthe2hosesfromthehosettings,and
allowanyfuelinthehosestodrainintoanapproved
fuelcontainer(Figure57).
46