Toro RT1200 - Maintenance Safety and Lubrication; General Safety for Maintenance; Greasing the Machine (Axles)

Premaintenance
Procedures
GeneralSafety
WARNING
Improperlyservicingorrepairingthemachinecan
causeinjuryordeath.
Ifyoudonotunderstandtheserviceprocedures
forthismachine,contactanAuthorizedToro
ServiceDealerorobtaintheservicemanualforthis
machine.
WARNING
Leavingamachinewithraisedattachments
unattendedcancauseinjuryordeath.
Beforeyouleavetheoperatingarea,alwayssupport
orlowertheequipmenttothegroundandstopthe
engine.
WARNING
Replaceallcoversandguardsafteryouserviceor
cleanthemachine.Neveroperatethemachine
withoutthecoversorguardsinplace.
1.Parkthemachineonalevelsurface.
2.Lowerallattachments,stoptheengine,andremove
thekey.
3.Allowtheenginetocool2or3minutes.
4.Removetheright-sidepanel;refertoRemovingthe
SidePanels(page45).
5.Rotatethebattery-disconnectswitchtotheOff
position;refertoBattery-DisconnectSwitch(page21).
Lubrication
GreasingtheMachine
GreaseType:Lithium-basedgrease.
GreasingtheFrontandRearAxles
ServiceInterval:Every250hours
1.Cleanthegreasettingswitharag.
2.Connectthegreaseguntothegreasettingsforthe
upperandlowerpivots;apply2or3pumpsofgrease
toeachtting(Figure54andFigure55).
Note:Thereare2greasettingsattheaxlepivotfor
eachtire.
Figure54
Frontaxle
1.Greasetting(upperpivot)2.Greasetting(lowerpivot)
43