Toro Workman HDX Series - Page 31

MaintenanceService
Interval
MaintenanceProcedure
Every600hours
•Adjusttheengine-valveclearance.
Every800hours
•Changethefrontdifferentialoil(4-wheeldrivemodelsonly).
•Changethehydraulicuidandcleanthestrainer.
•Replacethehydrauliclter.
•Ifyouarenotusingtherecommendedhydraulicuidorhaveeverlledthereservoir
withanalternativeuid,replacethehigh-owhydraulicuidandlter.
Every1,000hours
•Flush/replacethecoolantsystemuid.
•Changethebrakeuid.
•Ifyouareusingtherecommendedhydraulicuid,replacethehigh-owhydraulic
lter.
Every2,000hours
•Ifyouareusingtherecommendedhydraulicuid,changethehigh-owhydraulic
uid.
Note:Downloadafreecopyoftheelectricalschematicbyvisitingwww.T oro.comandsearchingforyour
machinefromtheManualslinkonthehomepage.
Important:Refertoyourengineowner’smanualforadditionalmaintenanceprocedures.
WARNING
Failingtoproperlymaintainthemachinecouldresultinprematurefailureofmachinesystems,
causingpossibleharmtoyouorbystanders.
Keepthemachinewellmaintainedandingoodworkingorderasindicatedintheseinstructions.
CAUTION
Onlyqualiedandauthorizedpersonnelshouldmaintain,repair,adjust,orinspectthemachine.
•Avoidrehazardsandhavere-protectionequipmentpresentintheworkarea.Donotuse
anopenametocheckuidlevelsorleakageoffuel,batteryelectrolyte,orcoolant.
•Donotuseopenpansoffuelorammablecleaninguidsforcleaningparts.
CAUTION
Ifyouleavethekeyintheswitch,someonecouldaccidentlystarttheengineandseriously
injureyouorotherbystanders.
Shutofftheengineandremovethekeyfromtheswitchbeforeyouperformanymaintenance.
31