Toro Workman HDX Series - Raising the Machine; Removing and Installing the Hood

RaisingtheMachine
DANGER
Amachineonajackmaybeunstableandslip
offthejack,injuringanyonebeneathit.
•Donotstartthemachinewhilethemachine
isonajack,astheenginevibrationor
wheelmovementcouldcausethemachine
toslipoffthejack.
•Alwaysremovethekeyfromthekeyswitch
beforegettingoffthemachine.
•Blockthetireswhenthemachineisona
jack.
Whenjackingupthefrontofthemachine,always
placeawoodenblock(orsimilarmaterial)between
thejackandthemachineframe.
Thejackingpointatthefrontofthemachineislocated
underthefront,centerframesupport(Figure26).
g009823
Figure26
1.Frontjackingpoints
Thejackingpointattherearofthemachineislocated
undertheaxle(Figure27).
g009824
Figure27
1.Rearjackingpoints
RemovingandInstalling
theHood
RemovingtheHood
1.Whilegraspingthehoodintheheadlight
openings,liftupthehoodtoreleasethelower
mountingtabsfromtheframeslots(Figure28).
g010314
Figure28
1.Hood
2.Pivotthebottomofthehoodupwarduntilyou
canpullthetopmountingtabsfromtheframe
slots(Figure28).
35