Toro Workman HDX Series - Jump-Starting the Machine

decal115-7813
Figure42
1.Poweroutlet(10A)5.Lights/brake(15A)
2.Switchedpower(10A)6.Hazardlights(10A)
3.Fuelpump/supervisor
switch(10A)
7.4WD/transmission(10A)
4.Horn/powerpoint(15A)
Jump-StartingtheMachine
WARNING
Jump-startingcanbedangerous.Toavoid
personalinjuryordamagetoelectrical
componentsinmachine,observethe
followingwarnings:
•Neverjump-startwithavoltagesource
greaterthan15VDC;thisdamagesthe
electricalsystem.
•Neverattempttojump-startadischarged
batterythatisfrozen.Itcouldruptureor
explodeduringjump-starting.
•Observeallbatterywarningswhile
jump-startingyourmachine.
•Besureyourmachineisnottouchingthe
jump-startmachine.
•Connectingcablestothewrongpostcould
resultinpersonalinjuryand/ordamageto
theelectricalsystem.
1.Squeezethebatterycovertoreleasethetabs
fromthebatterybaseandremovethebattery
coverfromthebatterybase(Figure43).
g010326
Figure43
1.Batterycover
2.Connectajumpercablebetweenthepositive
postsofthe2batteries(Figure44).
Note:Thepositivepostmaybeidentiedbya
+signontopofthebatterycover.
3.Connect1endoftheotherjumpercabletothe
negativeterminalofthebatteryintheother
machine.
Note:Thenegativeterminalhas“NEG”onthe
batterycover.
Note:Donotconnecttheotherendofthe
jumpercabletothenegativepostofthe
dischargedbattery.Connectthejumpercableto
theengineorframe.Donotconnectthejumper
cabletothefuelsystem.
g010325
Figure44
1.Battery
43