Toro Workman HDX Series - Removing the Full Bed

g009164
Figure22
1.Bedsupport3.Bed
2.Cylinderbarrel
4.Removethebedsupportfromthecylinder,and
insertitintothebracketsonthebackofthe
ROPSpanel.
Important:Donottrytolowerthebedwith
thebed-safetysupportonthecylinder.
RemovingtheFullBed
1.Starttheengine,engagethehydraulic-liftlever,
andlowerthebeduntilthecylindersareloose
intheslots.
2.Releasetheliftleverandshutofftheengine.
3.Removethelynchpinsfromtheouterendsof
thecylinderrodclevispins(Figure23).
g002368
Figure23
1.Cylinderrodend
4.Lynchpin
2.Bed-mountingplate
5.Rearslots(fullbed)
3.Clevispin6.Frontslots(2/3fullbed)
4.Removetheclevispinssecuringthecylinderrod
endstothebed-mountingplatesbypushingthe
pinstowardtheinside(Figure23).
5.Removethelynchpinsandclevispinssecuring
thepivotbracketstotheframechannels(Figure
23).
6.Liftthebedoffthemachine.
CAUTION
Thefullbedweighsapproximately148kg
(325lb),sodonottrytoinstallorremove
itbyyourself.
Useanoverheadhoistorgetthehelpof
2or3otherpeople.
7.Storethecylindersinthestorageclips.
8.Engagethehydrauliclift-lockleveronthe
machinetopreventaccidentalextensionofthe
liftcylinders.
33