December 2005 © TOSHIBA TEC e-STUDIO163/203 ADJUSTMENT
3 - 21
3
3.3.3 Sharpness adjustment
If you want to make copy images look softer or sharper, perform the following adjustment.
< Adjustment Mode (05) >
Make a test copy and compare the image obtained with the current settings; if necessary, make adjust-
ment using the following procedure.
<Procedure>
Procedure is same as that of " P. 3-19 "3.3.1 Density adjustment".
Original mode
Item to be adjusted Remarks
Text/
Photo
Photo Text
Photo
(Dither)
620 621 622 623 Sharpness adjustment Key in the following values depend-
ing on the original mode.
One’s place
Selecting a filter shape
Ten’s place
0: Use Default value
1 to 9: Change intensity
(The larger the value is, the sharper
the image becomes.)
• Example of value entry in case
the mode is “Text/Photo”.
Note:
Note:
When the value “0” is keyed
in at the ten’s digit, the value
is not displayed on LCD
screen.
2 1
Fixed value for Text/
Photo mode
Key in a value 0 to 9
To Next Page
Loading...
