December 2005 © TOSHIBA TEC e-STUDIO163/203 PREVENTIVE MAINTENANCE (PM)
4 - 15
4
4.7 Precautions for Storing and Handling Supplies
4.7.1 Precautions for storing TOSHIBA supplies
1) Toner/Developer
Toner and developer should be stored in a place where the ambient temperature is between 10°C to
35°C (no condensation), and should also be protected against direct sunlight during transportation.
2) Photoconductive drum
Like the toner and developer, photoconductive drum should be stored in a dark place where the
ambient temperature is between 10°C to 35°C (no condensation). Be sure to avoid places where
drums may be subjected to high humidity, chemicals and/or their fumes.
3) Drum cleaning blade
This item should be stored in a flat place where the ambient temperature is between 10°C to 35°C,
and should also be protected against high humidity, chemicals and/or their fumes.
4) Fuser roller / Pressure roller
Avoid places where the rollers may be subjected to high humidity, chemicals and/or their fumes.
5) Paper
Avoid storing paper in places where it may be subjected to high humidity.
After a package is opened, be sure to place and store it in a storage bag.
06/04
To Next Page
Loading...
