e-STUDIO163/203 ADJUSTMENT December 2005 © TOSHIBA TEC
3 - 30
3.5.5 Setting range correction (Adjustment of text peak)
The levels of the text peak for the range correction can be set at the following codes.
< Adjustment Mode (05) >
* The image changes slightly in text mode because it is treated as a simple binary format image.
<Procedure>
Procedure is same as that of " P. 3-27 "3.5.1 Density adjustment".
Original mode
Item to be adjusted Remarks
Text/Photo Photo Text
820 822 821 Text peak for range correction When the value is increased, text
(high image density part) becomes
lighter.
Acceptable values: 0 to 255
(Default: text/photo: 246, photo: 254,
text: 236)
06/04
To Next Page
Loading...
