Toshiba e-STUDIO203 - Page 143

December 2005 © TOSHIBA TEC e-STUDIO163/203 PREVENTIVE MAINTENANCE (PM)
4 - 5
4
F. Main charger
G. Transfer / Separation charger
H. Drum/Cleaner related section
Items to check Cleaning Lubrication
Replacement
(KD)
Operation
check
Parts list
<P-I>
Remarks
F1 Main charger case B P18-I1 *f1
F2 Needle electrode 72/90 P18-I2 *f1
F3 Contact point of termi-
nals
B
F4 Main charger wire
cleaner
R
$
P18-I7
F5 Main charger grid 72/90 P18-I3
Items to check Cleaning Lubrication
Replacement
(KD)
Operation
check
Parts list
<P-I>
Remarks
G1 Charger case B P19-I2 *g1
G2 Transfer charger wire 72/90
$
P19-I18 *g1
G3 Separation charger
wire
72/90
$
P19-I18 *g1
G4 Pre-transfer guide B or A
G5 Post-transfer guide B or A
G6 Separation supporter B P19-I17
G7 Terminal cover B P19-I10
G8 Contact point of termi-
nals
B
G9 Transfer guide roller B R P19-I14
Items to check Cleaning Lubrication
Replacement
(KD)
Operation
check
Parts list
<P-I>
Remarks
H1 Photoconductive drum 72/90 Chap.
4.7.2
H2 Discharge LED B
H3 Whole cleaner unit B
H4 Drum cleaning blade 72/90 P20-I5 *h1
H5 Separation finger for
drum
72/90 P20-I17 *h2
H6 Recovery blade B 72/90 P20-I6 *h3
H7 Ozone filter 72/90 P11-I3