December 2005 © TOSHIBA TEC e-STUDIO163/203 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 45
2
463 Scanner Control status ALL 0
<0-6>
SYS 0 : Normal end
1 : White level abnor-
mality (G)
2 : Peak detection
abnormality (G)
3 : Adjustment impossi-
ble (R)
4 : Adjustment impossi-
ble (B)
5 : Adjustment impossi-
ble (YG)
6 : White level abnor-
mality
1
464 Scanner Scanner LED setting ALL 0
<0-1>
SYS 0: LED ON
1: LED OFF
When “1” (LED OFF) is
set, the shading error
display is disable.
1
471-0 Paper
feeding
Paper size
(Postcard)
feeding
direction
ALL 148
<100-
432>
M * Postcard is sup-
ported only for JPN
model.
10
471-1 widthwise
direction
ALL 100
<100-
432>
M 10
476-0 Fuser Temperature
drop setting
during printing
(Center ther-
mistor/ Thick
paper)
The first
drop
ALL 1
<0-10>
M This code is valid only
when “20” is set to 08-
535.
Setting value x -5ºC:
from 0ºC to -50ºC
Thick paper:
Thick Paper1/Thick
Paper2/OHP/Envelope
4
476-1 The sec-
ond drop
ALL 1
<0-10>
M 4
476-2 The third
drop
ALL 1
<0-10>
M 4
476-3 The fourth
drop
ALL 1
<0-10>
M 4
480 Paper
feeding
Default setting of paper
source
PPC 0
<0-4>
SYS 0: A4/LT
1: Drawer
2: LCF
3: Not used
4: Not used
1
481 Paper
feeding
Automatic change of paper
source
PPC 1
<0-1>
SYS Sets whether or not
changing the drawer
automatically to the
other drawer with the
paper of the same size
when paper in the
selected drawer has run
out.
0: OFF
1: ON
1
482 Paper
feeding
Feeding retry setting ALL 0
<0-1>
M 0: ON
1: OFF
1
Setting mode (08)
Code
Classifi-
cation
Items
Func-
tion
Default
<Accept-
able
value>
RAM Contents
Proce-
dure
06/05
To Next Page
Loading...
