Toshiba e-studio205L - Printer Related Adjustment

e-STUDIO205L/255/305/355/455 © 2009 TOSHIBA TEC CORPORATION All rights reserved
ADJUSTMENT
3 - 8
3.3.3 Printer related adjustment
The printer related adjustment is performed by using the printed out grid pattern.
Fig. 3-9 Grid pattern
Adjustment
Tolerance
Detail of adjustment
A 200 ± 0.5mm  P.3-9 "[A] Reproduction ratio of primary scanning direction (Fine adjustment of
polygonal motor rotation speed (Printer))"
B 52 ± 0.5mm  P.3-9 "[B] Primary scanning data laser writing start position (Printer)"
C 200 ± 0.5mm  P.3-10 "[C] Reproduction ratio of secondary scanning direction (Fine
adjustment of main motor rotation speed (Copier/Printer))"
D 52 ± 0.5mm  P.3-11 "[D] Secondary scanning data laser writing start position"
E 52 ± 0.5mm  P.3-12 "[E] Primary scanning data laser writing start position at duplexing"
A
21
6
1
B, E
D
6
30 2
C
10
Feeding direction