Toshiba e-studio205L - Grease List

5
© 2009 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO205L/255/305/355/455
PREVENTIVE MAINTENANCE (PM)
5 - 49
5.11 Grease List
The greases used for the maintenance of this equipment are as follows.
5.12 Operational Items in Overhauling
Overhaul each equipment in the following timing.
• e-STUDIO205L: When the number of output pages has reached 240,000 or 2.5 years have passed
from the start of use (Whichever comes earlier)
• e-STUDIO255: When the number of output pages has reached 300,000 or 2.5 years have passed
from the start of use (Whichever comes earlier)
• e-STUDIO305: When the number of output pages has reached 360,000 or 2.5 years have passed
from the start of use (Whichever comes earlier)
• e-STUDIO355: When the number of output pages has reached 375,000 or 2.5 years have passed
from the start of use (Whichever comes earlier)
• e-STUDIO455: When the number of output pages has reached 450,000 or 2.5 years have passed
from the start of use (Whichever comes earlier)
(1) Replace all the supplies.
(2) Check the components in the drive section (gears, pulleys, timing belts, etc.). Replace them with
new ones if they are damaged.
(3) Check all the adhesives such as tape and Mylar if they are damaged or have become unstuck.
Replace them with new ones if necessary.
(4) Check the performance of all the switches and sensors. Replace them with new ones if
necessary.
(5) Clean inside the equipment thoroughly.
Grease name Volume Container
Parts list
<P-I>
SI Silicon oil 25cc Bottle 101-16
L Launa 40 100cc Oiler 101-11
W2 White grease (Molykote HP-300) 10g Bottle 101-12B
AV Alvania No.2 100g Tube 101-13
W1 White grease (Molykote EM-30L) 100g Tube 101-14
FL Floil (GE-334C) 20g Bottle 101-15