1
© 2009 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO205L/255/305/355/455
SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES
1 - 9
1.3 Options
* 1) N: North America E: Europe F: France S: Sweden
Notes:
• "-" means "Not acceptable".
• The bridge unit (KN-2520) is necessary for installation of the finisher (MJ-1101, MJ-1024, MJ-
1025, MJ-1031).
• The finisher (MJ-1101) is necessary for installation of the hole punch unit (MJ-6101N/E/F/S).
• The finisher (MJ-1024) is necessary for installation of the hole punch unit (MJ-6004N/E/F/S).
• The finisher (MJ-1025) is necessary for installation of the hole punch unit (MJ-6005N/E/F/S).
• The antenna (GN-3010) is necessary to enable the wireless LAN module (GN-1050) and
Bluetooth module (GN-2010).
• Only one Antenna (GN-3010) can be installed in the Bluetooth Module (GN-2010), while up to
two can be installed in the Wireless LAN Adapter (GN-1050).
• The Work Tray (KK-4550) and the e-BRIDGE ID Gate (KP-2004/2005) cannot be installed
together.
e-STUDIO205L/255/305 e-STUDIO355/455
original cover KA-1640 PC/PC-C KA-1640 PC/PC-C
Reversing Automatic
Document Feeder (RADF)
MR-3021/C MR-3022/C
Drawer Module MY-1033/C MY-1033/C
Paper Feed Pedestal (PFP) KD-1025/C KD-1025/C
Large Capacity Feeder (LCF) KD-1026 A4/LT/A4-C KD-1026 A4/LT/A4-C
Finisher - MJ-1101/-C
Finisher (Hanging type) MJ-1031/C MJ-1031/C
Saddle stitch Finisher MJ-1025 MJ-1024
Hole Punch Unit
MJ-6005N/E/F/S
*1
(for MJ-1025) MJ-6004N/E/F/S
*1
(for MJ-1024)
MJ-6101N/E/F/S
*1
(for MJ-1101)
Staple Cartridge STAPLE-2000 (for MJ-1025/MJ-
1031)
STAPLE-600 (for MJ-1024)
STAPLE-2000 (for MJ-1024/MJ-
1031)
STAPLE-2400 (for MJ-1101)
Bridge Kit KN-2520/C KN-2520/C
Job Separator MJ-5004/-C MJ-5006/C
Offset Tray MJ-5005/-C -
Operator's manual pocket KK-1660/-C KK-1660/-C
Accessible Arm KK-2550 KK-2550
Work Tray KK-4550/C KK-4550/C
Damp Heater MF-4550 U/E MF-4550 U/E
Fax Unit GD-1250 NA/EU/AU/AS/TW/C GD-1250 NA/EU/AU/AS/TW/C
2nd Line for Fax Unit GD-1260 NA/EU/AU/TW/C GD-1260 NA/EU/AU/TW/C
Printer kit GM-1150/C GM-1160/C
Printer/Scanner kit GM-2150/C GM-2160/C
Scanner upgrade kit GM-4150/C GM-4160/C
Wireless LAN Adapter GN-1050/C GN-1050/C
Bluetooth Module GN-2010 GN-2010
Antenna GN-3010/C GN-3010/C
e-BRIDGE ID Gate KP-2004 (HID)
KP-2005/C (MIFARE)
KP-2004 (HID)
KP-2005/C (MIFARE)
Desk MH-2520 MH-2520
Meta Scan Enabler GS-1010 GS-1010
External Interface Enabler GS-1020 GS-1020
Data Overwrite Enabler GP-1070 GP-1070
IP Sec Enabler GP-1080 GP-1080
Harness kit for coin controller GQ-1180 GQ-1180
To Next Page
Loading...
Need help?
General
