Toshiba e-studio205L - Background Adjustment

e-STUDIO205L/255/305/355/455 © 2009 TOSHIBA TEC CORPORATION All rights reserved
ADJUSTMENT
3 - 24
3.4.3 Background adjustment
The density of the background can be adjusted as follows.
< Adjustment Mode (05) >
Make a test copy and compare the image obtained with the current settings; if necessary, make
adjustment using the following procedure.
<Procedure>
Procedure is same as that of  P.3-23 "3.4.2 Density adjustment".
3.4.4 Sharpness adjustment
If you want to make copy images look softer or sharper, perform the following adjustment.
< Adjustment Mode (05) >
* The values in “( )” are the adjustment codes of the Custom Mode.
Make a test copy and compare the image obtained with the current settings; if necessary, make
adjustment using the following procedure.
Make a test copy and compare the image obtained with the current settings; if necessary, make
adjustment using the following procedure.
<Procedure>
Procedure is same as that of  P.3-23 "3.4.2 Density adjustment".
Original mode
Item to be adjusted Remarks
Text/
Photo
Photo Text
User
Custom
7033 7043 7034 7279 Automatic density mode The larger the value is, the lighter the
background becomes.
Acceptable values:0 to 255
(Default: 128)
7041 7048 7042 7280 Manual density mode
Original mode
Item to be adjusted Remarks
Text/
Photo
Photo Text
User
Custom
604 606 605 922 Sharpness adjustment The larger the value is, the sharper
the image becomes; while the
smaller the value is, the softer the
image becomes. The smaller the
value is, the less moire tends to
appear.
Acceptable values: 0 to 255
(Default: 128)