3
© 2009 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO205L/255/305/355/455
ADJUSTMENT
3 - 25
3.4.5 Setting range correction
The values of the background peak in the range correction can be switched to "varied" or "fixed" in the
following codes. If they are fixed, the range correction is performed with standard values.
The values of the background peak affect the reproduction of the background density.
< Adjustment Mode (05) >
Make a test copy and compare the image obtained with the current settings; if necessary, make
adjustment using the following procedure.
<Procedure>
Procedure is same as that of  P.3-23 "3.4.2 Density adjustment".
3.4.6 Adjustment of smudged/faint text
The smudged/faint text can be set at the following codes.
< Adjustment Mode (05) >
<Procedure>
Procedure is same as that of  P.3-23 "3.4.2 Density adjustment".
Original mode
Item to be adjusted Remarks
Text/
Photo
Photo Text
User
Custom
7283 7285 7284 7236 Automatic density mode 0: Background peak / fixed
1: Background peak / varied
7286 7288 7287 7237 Manual density mode
Original mode
Item to be adjusted Remarks
Text/
Photo
Text
User
custom
648 649 925 Adjustment of smudged/
faint spotted text
When the value increases, the smudged text is
improved.
When the value decreases, the faint text is
improved.
Acceptable values: 0 to 4 (Default: 2)
Note:
Remember the image specifications and life
span of the replacing parts may not meet
the standard when the setting value is
changed from the default value.
To Next Page
Loading...
Need help?
General
