Toshiba e-studio205L - Page 33

2
© 2009 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO205L/255/305/355/455
SELF-DIAGNOSIS MODES
2 - 5
[FAX] button: OFF/[COPY] button: OFF ([FAX] LED: OFF/[COPY] LED: OFF)
Digital
key
Button Items to check
Contents
Highlighted
display
e.g.
Normal
display
e.g.
[1]
A PFP connection Not connected Connected
B LCF connection Not connected Connected
C REV connection Not connected Connected
D ADU entrance sensor Paper present No paper
E ADU exit sensor Paper present No paper
F- --
G- --
H- --
[2]
A PFP side cover opening/closing switch Cover opened Cover closed
B PFP upper drawer feed sensor Paper present No paper
C PFP upper drawer detection switch Drawer not
installed
Drawer
present
D PFP upper drawer tray-up sensor Tray at upper
limit position
Other than
upper limit
position
E PFP upper drawer nearly empty sensor Drawer is
nearly empty
Paper present
F PFP upper drawer empty sensor No paper Paper present
G- --
H- --
[3]
A PFP motor rotation status (Motor is rotating at output mode
(03))
Abnormal
rotation
Normal
rotation
B PFP lower drawer feed sensor Paper present No paper
C PFP lower drawer detection switch Drawer not
installed
Drawer
present
D PFP lower drawer tray-up sensor Tray at upper
limit position
Other than
upper limit
position
E PFP lower drawer nearly empty sensor Drawer is
nearly empty
Paper present
F PFP lower drawer empty sensor No paper Paper present
G- --
H- --
[4]
A LCF motor rotation status (Motor is rotating at output mode
(03))
Abnormal
rotation
Normal
rotation
B LCF side cover opening/closing switch Cover closed Cover opened
C LCF feed sensor No paper Paper present
D LCF standby side empty sensor No paper Paper present
E LCF feed side empty sensor Paper present No paper
F LCL right drawer detection switch Drawer not
installed
Drawer
present
G LCL left drawer detection switch Drawer not
installed
Drawer
present
H- --