Toshiba e-studio205L - Page 335

3
© 2009 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO205L/255/305/355/455
ADJUSTMENT
3 - 95
<Adjustment procedure>
(1) Loosen screw A. Remove screw B and
temporarily fix it to position C.
Fig. 3-111
(2) Adjust the position of the stay with the scale
according to the dogleg image and tighten
screws A and C.
• Dogleg image A
Perform adjustment so that the stay of the
fuser unit comes below the center line of
the scale.
• Dogleg image B
Perform adjustment so that the stay of the
fuser unit comes above the center line of
the scale.
Fig. 3-112
Fig. 3-113
A
B
C
A
C
A
C