e-STUDIO205L/255/305/355/455 © 2009 TOSHIBA TEC CORPORATION All rights reserved
BACKUP FUNCTION
4 - 6
<When “5: SRAM Data Back Up” is selected>
(5) Press the [START] button. The backup starts and the backing up status is displayed on the LCD
screen.
(6) “Back Up Completed” is displayed on the LCD screen when the backup has been properly
completed.
(7) Turn the power OFF and remove the USB media.
* No items are selected in the screen by default.
Fig. 4-5
Number Backup Item
1. SRAM Backing up SRAM Data
* No items are selected in the screen by default.
Fig. 4-6
To Next Page
Loading...
