Toshiba e-studio205L - Page 400

e-STUDIO205L/255/305/355/455 © 2009 TOSHIBA TEC CORPORATION All rights reserved
PREVENTIVE MAINTENANCE (PM)
5 - 46
5.9 PM KIT
A PM kit is a package that includes replacement parts for each unit.
* 1. For KD-1025 (PFP) and MY-1033 (Drawer Module)
* 2. For MR-3021/3022 (RADF)
* 3. For KD-1026 (LCF)
Item Product name
Part name
Qty.
e-STUDIO205L/255/305 e-STUDIO355/455
DEV-KIT-4530 Drum cleaning blade BL-2320D 1
Recovery blade BLADE-REC 1
Separation finger for
drum
SCRAPER-371
2
Main charger grid GRID-CH-M-371 1
Needle electrode
- CH-M-470 1
CH-M - 1
Transfer roller CR-4530TR 1
Developer material D-4530 1
FR-KIT-4530 Fuser roller - HR-4530-U 1
Pressure roller - HR-4530-L 1
Separation finger for
fuser roller
-
SCRAPER-470 5
Ozone filter - FILTER-OZONE-F470 1
FR-KIT-3000 Fuser roller HR-4530-U - 1
Pressure roller HR-3000-L - 1
Separation finger for
fuser roller
SCRAPER-470
-5
Ozone filter FILTER-OZONE-F470 - 1
PM-KIT-ROLLER
*1
Feed roller ROLLER-PICK-AT 1
Transport roller ASYS-ROLL-SPT 1
Separation roller K-ROLL-SPT 1
DF-KIT-3018 *2 Pickup roller ASYS-ROL-FEED 1
Feed roller ASYS-ROL-FEED 1
Separation roller ASYS-ROL-RET 1
ROL-KIT-1026 *3 Pickup roller ASYS-ROL-PICK-KD1026 1
Feed roller ASYS-ROL-FEED-KD1026 1
Separation roller ASYS-ROL-RET-KD1026 1