Toshiba e-STUDIO2303A - Drawer Feed Roller <20 L;23 L;25 L;20 H;23 H;25 H>

e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A © 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 40
4.6.9 Drawer feed roller <20L/23L/25L/20H/23H/25H>
(1) Take off the drawer.
(2) Remove each 1 bushing [1] on both front and
rear side, and slide the shaft [2] to the rear
side.
Fig. 4-100
(3) Remove the clip [3].
Fig. 4-101
(4) Take off the drawer feed roller [4].
Fig. 4-102
[1]
[1]
[2]
[3]
[4]