Toshiba e-STUDIO2303A - 2 Specifications; Accessories; Options; Supplies

2
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES
2 - 1
2. SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES
2.1 Specifications
Notes:
In this document, a model name is replaced with an alias as follows:
2.1.1 General
Type......................................... Desktop type
Original glass........................... Fixed type (the left rear corner used as guide to place originals)
Copy process .......................... Indirect electrophotographic process (dry)
Fixing method.......................... Halogen lamp (2 pieces)
Photosensor type .................... OPC
Original scanning sensor......... Contact Image sensor (CMOS Line sensor)
Scanning light source .............. LED
Reproduction ratio ................... Actual ratio: 100±0.5%
Zooming: 25 to 400% in increments of 1%
Resolution ............................... Scanning: 600 dpi x 600 dpi
Printing: Equivalent to 2400 dpi x 600 dpi
Gradation................................. 256 steps
Paper feeding .......................... <20L/23L/25L, 23LA/23LM/28LM> 1 drawer + Bypass feeding + PFU
(optional)
<20H/23H/25H, 23HA/28HA> 1 drawer + Bypass feeding + PFU
(optional) + PFP 2 drawers (optional)
Model name Alias
e-STUDIO2006 20L
e-STUDIO2306 23L
e-STUDIO2506 25L
e-STUDIO2007 20H
e-STUDIO2307 23H
e-STUDIO2507 25H
e-STUDIO2303A 23LA
e-STUDIO2303AM 23LM
e-STUDIO2803AM 28LM
e-STUDIO2309A 23HA
e-STUDIO2809A 28HA