Toshiba e-STUDIO2303A - Paper Exit Motor (M6)

e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A © 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 118
4.10.4 Paper exit motor (M6)
(1) Remove 1 screw and remove the connector
cover [1].
Fig. 4-314
(2) Disconnect the Faston terminal [2].
Fig. 4-315
(3) Remove 3 screws and remove the rear cover
[3].
Notes:
When attaching the rear cover, be sure to
insert the two hooks on its right side before
tightening the screws.
Fig. 4-316
[1]
[2]
M3
M4
[3]