8
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
ERROR CODE AND TROUBLESHOOTING
8 - 89
8.4.22 Blotched image
Fig.8-24
Defective area Step Check items Prescription
Paper 1 Is the paper type corresponding to its
mode?
Check the paper type and mode.
2 Is the paper too dry? Change the paper.
Transfer roller unit 3 Is the power supplying spring of the
transfer roller installed securely? (Is it
almost detached?)
Check the power supplying spring
and reinstall it.
High-voltage transformer
(Transfer roller unit)
4 Is the output from the high-voltage
transformer normal?
Adjust the output. Replace the
transformer if necessary.
Separation 5 Is the output from the separation
charger too high?
Adjust the output, from the
separation charger.
Feeding direction
To Next Page
Loading...
