7
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
PREVENTIVE MAINTENANCE (PM)
7 - 13
7.4.2 Feed unit
Fig. 7-12
* c1. Drive gears in the paper feeding section (teeth of gears and shafts)
Apply some white grease (Molykote EM-30L) to the teeth of gears and shafts of the drive
gears.
When disassembling the driving section and applying grease at PM, follow the notes as
below.
Items to check Cleaning Lubrication
Replacement
(x 1,000 sheets)
Operation
check
Parts list
<P-I>
Remarks
C1 Drawer main feed
roller
A 80 19-12
C2 Drawer separation pad 80 19-10
C3 Paper guide B 12-15
C4 Drive gear
(tooth face and shaft)
W1 12-9 *c1
C5 GCB bushing bearing L 12-8
C6 Plastic bushing W1 19-13
C7 Registration roller
(metal)
A R 12-11
C8 Registration roller
(rubber)
A R 9-16
C1, C4, C6
C2
C5, C7
C5, C8
C3
To Next Page
Loading...
