Toshiba e-STUDIO2303A - Page 213

4
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
DISASSEMBLY AND REPLACEMENT
4 - 93
(4) Slide the exit roller [4] to the rear side, and
remove the bushing [5] from the frame.
Fig. 4-247
(5) Remove 2 springs [6].
Fig. 4-248
(6) Take off the exit roller [4].
Fig. 4-249
(7) Remove 1 E-ring [7] and then take off 1 gear
[8], 1 grounding spring [3] and 1 bushing [5].
Fig. 4-250
[4]
[5]
[6]
[4]
[7]
[3]
[8]
[5]