4
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
DISASSEMBLY AND REPLACEMENT
4 - 95
c. Route the AC harnesses so that they are hooked on the housing as shown below.
Fig. 4-252
d. When installing the cover of the fuser unit, make sure that the connector (harness) is not
caught.
e. Route the harnesses of the fuser unit so that they are hooked on the frame as shown
below.
Fig. 4-253
c
AC harnesses AC harnesses
e
To Next Page
Loading...
