Toshiba e-STUDIO2303A - Page 252

e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A © 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 132
(7) Remove 1 connector [6] and remove 1
connector [8] from the main board [7].
Fig. 4-352
(8) Remove the upper drawer and the lower
drawer (PFU drawer).
(9) Remove 1 screw and remove 1 front left
fixing bracket [9].
Fig. 4-353
(10) Remove 1 screw and remove 1 front right
fixing bracket [10].
Fig. 4-354
(11) Remove 1 screw and remove 1 rear left
fixing bracket [11].
Fig. 4-355
[6]
[7]
[8]
[9]
[10]
[11]