e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND TROUBLESHOOTING
8 - 62
MAIN board Check if the MAIN board in which is corresponded to the equipment
model is installed.
Check if the label color of the MAIN board (indicated in the figure
with the arrow) is corresponded to the equipment model (indicated
on the rating label).
20L: White
23L: Brown
25L: Purple
20H: Gray (NAD) / Red (Other than NAD)
23H: Orange (NAD) / Yellow (Other than NAD)
25H: Blue (NAD) / Pale blue (Other than NAD)
• Position of the label to be checked
If they are not corresponding correctly, replace the MAIN board with
the correct one by referring to the procedures described below.
Reference: P. 9-1 "9.1.1 Main board (MAIN)"
Parts to be replaced Remark
Harness
MAIN board
Check item Measure
To Next Page
Loading...
