Toshiba Qosmio X500

Test Program for Field.
The display of a test program and the set method of PC are shown
below.
Display of a Test Program
Set method of PC
7 Test5
Judgment
If all data is less than ranges, it will be OK.
8 Inspection
Judgment
If all data is less than ranges, it will be OK.
9 Setting
Calibration
data
When an inspection result is O.K., calibration at HPC.
U
pp
e
r
Left
2. Test Result
A test result is displayed when a test is completed. A display of result is O.K. or NG.
And an error flag is returned at the end of a program.
OK is 0.
NG is 1.
Qosmio X500 Maintenance Manual (960-Q08) 17