Test Program for Field.
3.20 Running Test Edit Item
3.20.1 Function Description
Function description lets you add or delete the subtests used to execute the Running Test.
The following screen displays after pressing the Tab key to edit an item in the Running Test.
KEY OPERATION
 Cursor Down
 Cursor Up
PgDn Page Down
PgUp Page Up
Home Top of ITEM
End End of ITEM
Ins Insert ITEM
Del Delete ITEM
Enter End
3.20.2 Operation Description
Select 05 from the Diagnostics Menu and press Enter to display the following:
Test Item Editor [RUNNING TEST]
Loop Count (1-65535, 0 = infinity) 00000 Error Stop NO
T-No Test Name S-No Subtest Name
01 System Test Subtest 01 ROM Checksum
02 Memory Test Subtest 01 Conventional Memory
02 Memory Test Subtest 02 Protect Mode
02 Memory Test Subtest 03 Protect Mode (32MB Max)
02 Memory Test Subtest 04 RAM Refresh
04 Display Test Subtest 01 VRAM W/R/C
04 Display Test Subtest 02 Character Attribute Set
04 Display Test Subtest 03 Character Set
04 Display Test Subtest 04 80 * 25 Character Display
04 Display Test Subtest 05 320 * 200 Graphics Display
04 Display Test Subtest 06 640 * 200 Graphics Display
04 Display Test Subtest 07 640 * 480 Graphics Display
04 Display Test Subtest 08 Display Page
05 Floppy Disk Test Subtest 02 Sequential W/R/C
08 Hard Disk Test Subtest 01 Sequential Read
08 Real Time Clock Test Subtest 02 Backup Memory Test
Tab: HELP (Key Operation)
66 Qosmio X500
Maintenance Manual (960-Q08)
To Next Page
Loading...
Need help?
General
