Station Apparatus
7-18
Strata CTX I&M September 2002
Step 1:
To turn DKT2000/2500 Mode On/Off
Important!
You must change the mode on DKT3000/3500 telephone before connecting a DKT2004-
CT or DKT2104-CT to the DKT3000/3500.
1. On the DKT3000/3500 telephone, press
3+6+9+Hold (simultaneously).
2. Press
#.
3. Press
FK7 (or FK13 on the DKT3014). LED On = 2000/2500 telephone. LED Off = 3000/3500
telephone.
4. Press
Hold.
5. Lift the handset to exit programming mode. Wait a few seconds for the telephone to reset itself.
Step 2:
Connect the cordless telephone to the DKT3000/3500 telephone.
Redial/Feature Button Activation/Deactivation (DKT3001 only)
Your Flex
button has been set to act as a
Redial button by default. However, you can reprogram the
Flex button to work as Flexible Button, as it it set in system programming. These steps enable you to
change how the button functions.
1. Press
3+6+9+Hold (simultaneously).
2. Press
0 7.
3. Press
Msg to toggle On/Off
Msg LED On: Flex button works as Feature Button
Msg LED Off: Flex button works as a Redial button.
4. Press
Hold to set the option.
5. Go off-hook, then on-hook to exit the program mode.
Note
If you program the Flex button to work as Flexible Button 3, you can press
*
to redial.
Msg/Feature Button Activation/Deactivation (DKT3001 only)
Your Msg button has been set by default to work as a Msg button; however, you can reprogram it to
work as Feature Button.
1. Press
3+6+9+Hold (simultaneously).
2. Press
0 8.
3. Press
Msg to toggle On/Off.
Msg LED On: Msg operates as Feature Button
Msg LED Off: Works as a Msg button.
4. Press
Hold to set the option.
5. Go off-hook, then on-hook to exit the program mode.
To Next Page
Loading...
