2-13
Strata CTX I&M September 2002
Strata CTX100 Installation
Figure 2-12 Cable Wiring for the Base with an Expansion Cabinet (Side view)
Figure 2-13 Cable Wiring for the Expansion Cabinet (Side view)
Step 7: Check Power Supply Circuit Breakers and Fuses
This step is only needed if you experience problems with the system.
WARNING! Whenever the cabinet top cover is removed, use extreme caution. Do not
touch any internal power supply components because hazardous voltages
may be exposed. Whenever adding/removing power supply components or
checking circuit breakers and fuses, unplug the power supply AC plug from
the AC source outlet.
ABTC -3M C able to Battery C harger
Base C abinet
5994
ABTC -3M Battery C able
to Battery C harger
ABTC -3M Battery C able
is secured with a tie wrap.
Expansion C abinet
5996
To Next Page
Loading...
