Toshiba Strara CTX Series - Licensed Software Options; CTX670 Cabinet Slots; Base Cabinet

Strata CTX Configuration
1-8
Strata CTX I&M September 2002
Licensed Software Options
Some software options are activated with license codes. The following software options require a
license:
◆
Each CTX system (node) in a Strata Net QSIG Network requires one CTX670 QSIG LIC license. A
maximum of four serial network nodes are allowed in any one serial chain in the network topology.
◆
Each individual CTI Open Architecture application requires one CTX670 CSTA LIC license
(maximum nine).
CTX670 Cabinet Slots
Base Cabinet
The Base Cabinet has two dedicated slots used for the system processor PCBs and eight universal
slots, labelled “S101~S108,” that can accommodate station, Exchange line or option PCBs (see
Figure 1-3). It also houses a power supply.
Figure 1-3 Strata CTX670 Base Cabinet Interior
POW
+5V
-5V
P.F .
RESET
EXP
BASE
AC IN
BATT
DC OUT
-24V1
-24V2
-24V3
-24V4
+
-
POWER
ON
OFF
FG
5002
B101 B102 S101 S102 S103 S104 S105 S106 S107 S108
5466
B101 B102 S101 S102 S103
S104 S105 S106 S107
S108