EasyManua.ls Logo

Toshiba Strara CTX Series - Telephone Speaker Off-hook Call Announce Upgrade (DVSU); BVSU;DVSU Upgrade Installation

Toshiba Strara CTX Series
290 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Station Apparatus
7-37
Strata CTX I&M September 2002
Telephone Speaker Off-hook Call Announce Upgrade (DVSU)
To receive Speaker Off-hook Call Announce (OCA) calls over the digital telephone speaker, a 2000/
2500-series digital telephone must be upgraded with a DVSU; the telephone making the call does not
require a DVSU. Digital telephones do not require an additional wire pair to receive Speaker OCA
call.
BVSU/DVSU Upgrade Installation
See Figures 7-25 and 7-31 and follow these steps:
1. Loosen the four captive screws on the
telephone base and remove the base.
2. For the BVSU only, make sure that the SW1
and SW2 pins are set per Tables 7-9 and
Tables 7-10.
3. Position the BVSU/DVSU PCB on the
standoffs, and secure with the four provided
screws.
4. Connect the BVSU/DVSU wire plugs to the
DVSU connectors on the PCB inside the
phone.
5. Reinstall the telephone base and secure it
with its four captive screws.
Figure 7-32 Speaker Off-hook Call Announce Upgrade (BVSU1A)
To PCI/VSU
C onnectors
on Telephone
Red Wire
F asten
Four
Screws
6072
Figure 7-31 BVSU/DVSU Installation
6073
BVSU1A
HFU
SPF
SW2
SW1
20 Mu
20 A
30
Move jumper to
the middle position
(20 Mu) for
DKT2000 phones

Table of Contents

Related product manuals