Station Apparatus
7-26
Strata CTX I&M September 2002
Figure 7-24 Tilt Stands in Raised Position for DKT and Two ADMs
Telephone Wall Mounting
This section explains how to mount digital telephones to a wall. See the manufacturer’s documentation
for instructions on mounting standard phones.
Notes
●
Digital telephones equipped with BPCIs or PDIU-DI2s cannot be wall mounted.
●
DKT3014-SDL equipped with a BHEU cannot be wall-mounted.
●
2000/2500-series digital telephones with headsets can only be wall mounted with an HHEU2.
➤
To mount digital telephones
Refer to Figures 7-25~7-27 and the following steps.
1. Loosen the captive screws, and remove the
telephone base.
2. Using a suitable cutter, remove the handset hanger
from the base.
3. Insert the handset hanger in the slot on the front of
the phone. The hanger fits in the notch on the
handset cradle.
4. Rotate the telephone base 180 degrees and secure
it to the telephone with its four captive screws.
Note
Tilt up the LCD of the DKT3014-SDL before
fixing the base.2000/2500-series telephone
option
5849
Handset Hanger
P lastic T ab
1478
Figure 7-25 Removing the Telephone Base
To Next Page
Loading...
