Strata CTX670 Installation
3-12
Strata CTX I&M September 2002
Back Cover
15.2cm (6 inches) betw
bottom cabinet
and floor
Plaster Board Wall
Dealer Supplied
#12 X 1.25"
Wood Screws
(4 Screws Per
Cabinet)
#12 X 2" (or long enough to
secure to the wall stud)
Wood Screws
Use as many as necessary to
secure plywood backboard.
9cm (3/4") Plywood Backboard
Floor
5040
1.53m (5.0 ft.) minimum
for 5 cabinets
or
1.98m (6.5 ft.)
for 7 cabinets
Locating
Parts
Figure 3-4 Cabinet Mounting Surface Diagram
To Next Page
Loading...
