Toshiba TECRA A10 Maintenance Manual

2 Troubleshooting Procedures 2.17 PCI ExpressCard Slot Troubleshooting
2-62 [CONFIDENTIAL] Satellite Pro S300, TECRA A10/S10/P10 Maintenance Manual (960-684)
2.17 PCI ExpressCard Slot Troubleshooting
This section describes how to check PCI ExpressCard slot by inspecting a card with PCI
Express interface and a card with USB 2.0 interface.
1. Gigabit Ether ExpressCard
2. USB2.0 5in1 ExpressCard
1. Gigabit Ether ExpressCard
(1) Insert the Gigabit Ether ExpressCard into the ExpressCard slot.
(2) On Windows, open System Property → Hardware → Device Manager window.
(3) Make sure that the following device is recognized on the Device Manager window.
Marvell Yukon 88E8053E PCI-E Gigabit Ethernet Controller #2
(“#2” is displayed in the PC with a built-in LAN of Gigabit, because the controller is
the same one. “#2” is not displayed in the PC with a built-in LAN of
10/100 Megabit.)
(4) After confirmation, take a “Safety Remove” procedure and pull out the Gigabit Ether
ExpressCard
2. USB2.0 5in1 ExpressCard
(1) Insert the USB2.0 5in1 ExpressCard into the ExpressCard slot.
(2) On Windows, open System Property →Hardware → Device Manager window.
(3) Make sure that the following device is recognized on the Device Manager window.
USB 2.0 5in1 ExpressCard USB Device
(4) After confirmation, take a “Safety Remove” procedure and pull out the USB2.0 5in1
ExpressCard.

Toshiba TECRA A10 Specifications

General

Processor	Intel Core 2 Duo
RAM	Up to 4GB DDR2
Graphics	Intel GMA 4500MHD
Chipset	Intel GM45 Express
Optical Drive	DVD SuperMulti Drive
LAN	Gigabit Ethernet
Display	15.4-inch
Storage	Up to 320GB HDD
Operating System	Windows Vista Business
Weight	2.7 kg
Wireless	802.11a/g/n
Ports	VGA