4.31 LCD unit/FL inverter 4 Replacement Procedures
4.31 LCD unit/FL inverter
Removing the LCD unit/FL inverter
To remove the LCD unit/FL inverter, follow the steps below and refer to Figure 4-56 to 4-60.
1. Remove the wireless LAN antenna cables and camera harness from the slot.
Camera harness
Wireless LAN antenna cable (white)
Wireless LAN antenna cable (black)
Figure 4-56 Releasing the harnesses
TECRA A10/S10/P10/SatellitePro S300 Maintenance Manual (960-684) [CONFIDENTIAL] 4-89
To Next Page
Loading...
