4 Replacement Procedures  4.33 LCD harness 
4.33 LCD harness 
Removing the LCD harness 
To remove the LCD harness, follow the steps below and refer to Figure 4-62 to 4-64. 
1.  Turn up the insulator and release the LCD harness from the guide. 
LCD harness
Insulator
Guide 
 
Figure 4-62   Removing the LCD harness (1) 
4-102 [CONFIDENTIAL]  TECRA A10/S10/P10/SatellitePro S300 Maintenance Manual (960-684)