Toshiba TECRA A10 - PC Card;Bridge Media;Smart Card

4.4 PC card/Bridge media/Smart card 4 Replacement Procedures
4.4 PC card/Bridge media/Smart card
4.4.1 PC card
Removing the PC card
To remove the PC card, follow the steps below and refer to Figure 4-4.
CAUTION: Insert or remove a PC card in accordance with any instructions in their
manual or the manuals of the computer system you are using.
1. Press the eject button for the PC card to extend the button.
2. Press the extended eject button to pop the PC card out.
3. Grasp the PC card and pull it out.
Eject button
PC card
Figure 4-4 Removing the PC card
Installing the PC card
To install the PC card, follow the steps below and refer to Figure 4-4.
1. Insert the PC card into the card slot.
2. Push it carefully to ensure a firm connection.
TECRA A10/S10/P10/SatellitePro S300 Maintenance Manual (960-684) [CONFIDENTIAL] 4-15