Toshiba TECRA A10 - Keyboard

4.9 Keyboard 4 Replacement Procedures
4.9 Keyboard
Removing the Keyboard
To remove the keyboard, follow the steps below and refer to Figure 4-14 to 4-17.
CAUTION: As the keytop may fall out, when handling the keyboard always hold it by the
frame and do not touch the keytop.
1. Turn over the computer.
2. Insert your fingers into the slits and release both sides of latches of the KB holder at the
rear.
KB holder
Slit
Slit
Figure 4-14 Removing the KB holder (1)
TECRA A10/S10/P10/SatellitePro S300 Maintenance Manual (960-684) [CONFIDENTIAL] 4-27