Toshiba TECRA A10 - Bluetooth Module

4.29 Bluetooth module 4 Replacement Procedures
4.29 Bluetooth module
Removing the Bluetooth module
To remove the Bluetooth module, follow the steps below and refer to Figure 4-54.
1. Lift up the hook and slide the Bluetooth holder in the direction in the figure below
to remove it from the guides.
2. Remove the Bluetooth module from the guides.
Bluetooth harness
Bluetooth holder
Bluetooth module
Guide
Guide
Guide
Hook
Figure4-54 Removing the Bluetooth module
Installing the Bluetooth module
To install the Bluetooth module, follow the steps below and refer to Figure 4-54.
TECRA A10/S10/P10/SatellitePro S300 Maintenance Manual (960-684) [CONFIDENTIAL] 4-85