Toshiba TECRA A10 - Figure 1-7 Keyboard

4 Replacement Procedures 4.9 Keyboard
7. Remove the following screw and slide the KB support plate in the direction as shown
in the figure below to remove.
• M2.5×10B FLAT HEAD screw ×1
8. Disconnect the keyboard flexible cable from the connector CN3230 on the system
board and remove the keyboard.
M2.5×10B FLAT HEAD
KB support plate
Keyboard
Keyboard flexible cable
CN3230
Figure 4-17 Removing the keyboard (2)
4-30 [CONFIDENTIAL] TECRA A10/S10/P10/SatellitePro S300 Maintenance Manual (960-684)