3.20 ONLY ONE TEST 3 Tests and Diagnostics
Subtest 01 Pressed Key Display (Main key)
When you execute this subtest, the keyboard layout is drawn on the display as
shown below. When any key is pressed, the corresponding key on the screen
changes to the key character that was pressed. Holding a key down enables the
auto-repeat function that causes the key’s display character to blink.
Press Del + Enter to end the test.
IF TEST OK, Press [Dell][Enter]key
Satellite Pro S300, TECRA A10/S10/P10 Maintenance Manual (960-684) [CONFIDENTIAL] 3-41
To Next Page
Loading...
