Toshiba TECRA A10 - Page 230

4 Replacement Procedures
4-vi [CONFIDENTIAL] TECRA A10/S10/P10/SatellitePro S300 Maintenance Manual (960-684)
Figure 4-31 Removing the MDC modem........................................................................ 4-51
Figure 4-32 Removing the USB board............................................................................4-52
Figure 4-33 Removing the RGB harness......................................................................... 4-54
Figure 4-34 Removing the RJ45 harness......................................................................... 4-55
Figure 4-35 Removing the serial board...........................................................................4-57
Figure 4-36 Removing the microphone harness.............................................................. 4-59
Figure 4-37 Removing the system board ........................................................................4-61
Figure 4-38 Removing the DC-IN harness/HDD harness............................................... 4-62
Figure 4-39 Removing the GFX board/GFX fin (1)........................................................ 4-64
Figure 4-40 Removing the GFX board/GFX fin (2)........................................................ 4-65
Figure 4-41 Removing the CPU fin/DC fan (1) .............................................................. 4-67
Figure 4-42 Removing the CPU fin/DC fan (2) .............................................................. 4-68
Figure 4-43 Removing the CPU...................................................................................... 4-69
Figure 4-44 Installing the CPU........................................................................................4-70
Figure 4-45 Applying new grease ...................................................................................4-71
Figure 4-46 Removing the PC card unit.......................................................................... 4-72
Figure 4-47 Removing the RTC battery.......................................................................... 4-74
Figure 4-48 Removing the sound board .......................................................................... 4-76
Figure 4-49 Removing the battery lock........................................................................... 4-78
Figure 4-50 Removing the touch pad/fingerprint sensor board (1).................................4-80
Figure 4-51 Removing the touch pad/fingerprint sensor board (2).................................4-81
Figure 4-52 Removing the touch pad/fingerprint sensor board (3).................................4-82
Figure 4-53 Removing the touch pad/fingerprint sensor board (4).................................4-83
Figure 4-54 Removing the Bluetooth module................................................................. 4-85
Figure 4-55 Removing the Smart card unit ..................................................................... 4-87
Figure 4-56 Releasing the harnesses ...............................................................................4-89
Figure 4-57 Removing the LCD cover............................................................................4-90
Figure 4-58 Removing the FL inverter ........................................................................... 4-91
Figure 4-59 Removing the LCD unit (1)......................................................................... 4-92
Figure 4-60 Removing the LCD unit (2)......................................................................... 4-93
Figure 4-61 Removing the camera module/wireless LAN antenna/3G antenna ............4-95
Figure 4-62 Removing the LCD harness (1) ................................................................. 4-102